THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE. THE ENTIRE RISK AS TO USE, RESULTS AND
PERFORMANCE OF THE PACKAGE IS ASSUMED BY YOU AND IF THE PACKAGE SHOULD PROVE
TO BE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING,
REPAIR OR OTHER REMEDIATION.
UNDER NO CIRCUMSTANCES, CAN THE AUTHOR BE HELD RESPONSIBLE FOR ANY DAMAGE
CAUSED IN ANY USUAL, SPECIAL, OR ACCIDENTAL WAY, ALSO IF THE OWNER OR A THIRD
PARTY HAS BEEN POINTED AT SUCH POSSIBILITIES OF DAMAGE.
This install applies to "Groovy" © 1993 Lemon.
This install requires WHDLoad and DIC to be in the path.
To install from a different drive than DF0: select installation mode Expert.
The installed demo requires 0.5 MB ChipMem and 0.5 MB OtherMem
(+0.9 MB OtherMem for preload).
It can be quit by pressing F10 (key can be changed with Tooltype "QuitKey=").
- Full load from HD
- Wrong Bltcon0 values fixed (x7)
- Byte write to $dff043 fixed (x6)
- Blitter waits added (x100, 68010+ only)
- Decruncher (ProPack) relocated to fast memory
- Interrupts fixed
- Bplcon0 color bit fixes (x11)
- CPU dependent delay fixed
- NewIcon and RomIcon (created by JHZ)
- Source code included as usual
- Quit option that works on 68000 machines (default key is 'F10')
Another old patch redone, in v1.0 none (read: 0) of the bugs were fixed,
except for patching the loader and relocating the decruncher nothing
was done. The memory routines weren't patched properly either so 1 MB
chip memory was needed. Quite a quality patch by the usual suspect again...
Anyway, I have completely redone it now and fixed all the problems. The
code is quite good and clean but there still were a lot of problems to
fix. All line drawers were buggy (byte writes to BltCon1+1 ($dff043),
wrong octant tables), a lot of blitter waits had to be added in the
copper chunky parts (only installed on 68010+ machines), interrupts
needed fixing and a lot of Bplcon0 color bit fixes were needed as well.
The demo is quite nice so it deserves a proper patch!
I have added a 3 seconds delay for the title picture, since it's displayed
while loading it will disappear very fast when loading the data from HD
for obvious reason. To skip directly to the demo you can press either mouse
Enjoy the demo from HD.
Greetings to all in Scarab and Scoopex, the WHDLoad team, PMC,
Musashi5150, Skan, Slummy, Loaderror, Frequent, Wayne Kerr, Mr.Spiv,
Alpha One, CFou!, Paradroid, Audiomonster, Vention, Slammer
Axis, Tim, Triace, Britelite, Buzzer and all the other usual suspects. :)
Special greetings to all Golf MK1 fans worldwide and all classic
car owners/drivers. :)
Extra greetings to the usual suspects on #amigascne, see you all at
Revision 2016! :)
version 1.1 (07.03.2016) done by StingRay:
- patch redone
- Bplcon0 color bit fixes
- blitter waits added (68010+ only)
- interrupts fixed
- line drawing routines fixed (Bltcon0 tables, byte write to $dff043)
- now works with 512k Chip and 512k Other Mem (V1.0 needed 1 MB Chip)
- 68000 quitkey support
- new install script
- wource code included
version 1.0 (02.06.2000) done by MiCK:
- initial release
If you have problems with this installation please try and get a newer
version of this package from the WHDLoad WWW-Page. If that doesn't help try
some Tooltypes like NOCACHE, NOAUTOVEC, EXPCHIP, NOMMU, PAL or NTSC. If
that also fails, please inform the author via the Bug-Report-Form which
can be accessed on the WHDLoad WWW-Page.
For the full WHDLoad package, other installs and updates refer to: