THIS PACKAGE COMES WITH ABSOLUTELY NO WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE. THE ENTIRE RISK AS TO USE, RESULTS AND
PERFORMANCE OF THE PACKAGE IS ASSUMED BY YOU AND IF THE PACKAGE SHOULD PROVE
TO BE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING,
REPAIR OR OTHER REMEDIATION.
UNDER NO CIRCUMSTANCES, CAN THE AUTHOR BE HELD RESPONSIBLE FOR ANY DAMAGE
CAUSED IN ANY USUAL, SPECIAL, OR ACCIDENTAL WAY, ALSO IF THE OWNER OR A THIRD
PARTY HAS BEEN POINTED AT SUCH POSSIBILITIES OF DAMAGE.
This install applies to "Kick Off 3" © 1994 Anco.
This install requires WHDLoad and DIC to be in the path.
These programs can be found in the WHDLoad package.
To install from a different drive than DF0: select installation mode Expert.
The installed game requires 1 MB ChipMem (+1.8MB for Preload).
It can be quit by pressing F10 (key can be changed with Tooltype "QuitKey=").
- Full load from HD
- Load/Save from data disk supported
- Protection removed (12xchecksums, 4xdisk checks, 1x "Cobra X-Rom encryption")
- Keyboard routine fixed
- Automatic creation of data disk (see below)
- NewIcon and OS3.5 color icons (created by Irek'72, Dr.Zarkov and Exotica)
- Quit option that works on 68000 machines (default key is 'F10')
Not much to say about this one, I coded the patch back in
March 2009 but never got around to creating the install package
because of a problem with the AGA version (1 file is corrupt).
Thus this patch only supports the ECS version (SPS 191) at the moment,
AGA support will be added later when I fixed the problem with
the corrupted file.
Just like the European Challenge version the patch for the ECS
version needs 1MB Chip mem because the Anco coders were unable
to code a simple relocation routine, instead, they provided
2 binaries of the game, one for 1MB Chip machines, 1 for
machines with fake fast at $c00000. No further comments needed!
Load/Save is fully supported, if you already have a data
disk you can use DIC to create an image of it. The
data disk must be named disk.3.
The slave will create the data disk if none is found.
You can disable this feature with the CUSTOM1=1 tooltype.
Merry Christmas, Sting, 04-Dec-2011
Greetings to all in Scarab and Scoopex, the WHDLoad team and to Musashi5150 :)
Extra greetings to the usual suspects on #amigascne, see you all at
Revision 2011! :)
Special thanks to lolafg for testing the patch and Irek'72
for the nice icons.
version 1.0 (04.12.11) done by StingRay:
- initial release
- supports ECS version (SPS 191)
- load/save fully supported
- source code included
If you have problems with this installation please try and get a newer
version of this package from the WHDLoad WWW-Page. If that doesn't help try
some Tooltypes like NOCACHE, NOAUTOVEC, EXPCHIP, NOMMU, PAL or NTSC. If
that also fails, please inform the author via the Bug-Report-Form which
can be accessed on the WHDLoad WWW-Page.
For the full WHDLoad package, other installs and updates refer to: